Innovative controls, protection and operation devices. Microprocessor based electronic relays.
Software
Novatek Device Manager
Novatek Device Manager has been designed as an automation tool for controlling technological process flow. It provides solution for the following tasks:
• After the program is started, it runs a computer scan. It automatically defines the communication ports, to which industrial flow process automation devices can be connected.
• In program’s main window the user develops the process flow diagram while defining the communication port interfaces and devices connected. For each device, the program creates links, which define the range of parameters controlled, and frequency of saving their values in respective report files.
All user-assigned project parameters are saved in the special project description file;
•The project can be started to run; during this, the program controls the ranges of controlled parameters set in links dialogue window, and repeatedly saves parameters in the report files;
•A project, that has been run, can be stopped or paused at any time. Upon completion of the project run, the user can make changes to the project flow diagram and existing links to devices. A changed project can be saved in the project file under current name or a new project name. It can also be set to run;
•During the project run, the program controls the ranges of controlled parameters set by the user in the corresponding links. If any value goes out of the specified range, the program signals about it in the special warning message window.
Supported devices:
•UBZ-302 induction motor universal protection device;
•UBZ-302 lift , induction motor universal protection device;
•UBZ-301 universal electric motor protection devices with BO-01 Exchange Unit;
•TP-100 Digital temperature relay
Download Novatek Device Manager
UBZ-302 Control panel (standart)
UBZ-302 Control Panel (Standard)
UBZ-302 Control Panel software (CP) is dedicated for monitoring the status and retrieving data from UBZ-302 devices via communication interface (RS-232 or RS-485). The CP allows for saving (loading) various UBZ settings, retrieving data and saving them for further research. The saved data can be viewed on a graph while comparing parameters.
The CP graphic environment allows for real-time viewing the current status of various UBZ parameters. The flexible interface design allows tuning it to any user’s preferences.
UBZ-302 Control panel (standart)
Configuration Tool
The Configuration Tool is designed for remote programming (via RS-485, RS-232 network) of devices with use of a PC, and has a convenient graphical interface.
Supported devices:
UBZ-302 (standard) universal protection device;
UBZ-302 (lift) universal protection device;
TP-100 Digital temperature relay.
UBZ-302-01 Control Panel (Lift)
UBZ-302-01 Control Panel software (CP) is dedicated for monitoring the status and retrieving data from UBZ-302-01 devices via communication interface (RS-232 or RS-485). The CP allows for saving (loading) various UBZ settings, retrieving data and saving them for further research. The saved data can be viewed on a graph while comparing parameters.The CP graphic environment allows for real-time viewing the current status of various UBZ parameters. The flexible interface design allows tuning it to any user’s preferences.
UBZ-302-01 Control Panel (Lift)
TP-100 Digital temperature relay
TR-100 is designed for measuring and controlling a device temperature via four sensors connected according to a two- or four-wire diagram, with subsequently displaying the temperature on screen and generating alarms when any parameters fall beyond set limits.
TR-100 control and status monitoring program
The software control panel of TR-101
The software is designed for viewing and analyzing data recorded by RPM-16-4-3 device.The software control panel of TR-101 (further CP) is designed for operational control and data logging from TR-101 by means Ethernet or RS-485 protocols. PU allows to adjust and set up different thresholds of TR-101, as well as information collection and save them for further investigations and detailed analysis. It's possible to check and demonstrate written information on diagrams and oppose parameters to each other. The graphic interface of PU allows in real time to check the real condition of different parameters of TR-101. The flexible adjustment of interface allows to be prepared to any user.
RPM-16-4-3 recorder of electrical process data
The software is designed for viewing and analyzing data recorded by RPM-16-4-3 device.
RPM-16-4-3 recorder of electrical process data
OM-310 Control Panel
OM-310 Control Panel (CP) software is dedicated for monitoring the status and retrieving data from OM-310 device via communication interface (RS-232 or RS-485). The CP allows for saving (loading) various OM-310 settings, retrieving data and saving them for further research. The saved data can be viewed on a graph while comparing parameters. The CP graphic environment allows for real-time viewing the current status of various UBZ-OM parameters. The flexible interface setup allows adapting it for any user’s preferences..