to top
Current relays and power limiters

RMТ-101

RMT-101 current overload relay is used for load rejection in case the current exceeds the set value between 0 and 100 amperes.

RMT-101 current overload relay is used for load rejection in case the current exceeds the set value between 0 and 100 amperes.

 

 

The device can be used in the following capacities:

 

 

  • digital ammeter;

 

  • current consumption limiting relay;

 

  • priority load selection relay.

 

 

LEDs on the front panel of the relay indicate:

 

 

  • load state (on/off);

 

  • exceeding the maximum allowed load current threshold.

 

 

Depending on the work mode, the three-digit seven-segment indicator indicates:

 

 

  • actual load current value;

 

  • maximum current value after the last reset;

 

  • value of the parameter being set;

 

  • time remaining until load activation or rejection;

 

  • presence of a reclosing blockage.

 

 

Regulating potentiometers allow the user to set the following values:

 

 

  • maximum allowed load current value threshold;

 

  • time for load rejection in case of exceeding;

 

  • maximum allowed load current threshold;

 

  • time delay before load activation after the current returns to the allowed level.

Ask questions specialist

Write Message
Order a free call from our expert.

Message successfully sent! Our manager will contact with you as soon as possible.
Error! Message not sent.