to top
Temperature controllers

TR-100 Digital Temperature Relay

TR-100 is used to measure and control device temperature via four RT100 sensors connected in a two- or-three-wire circuit, with subsequent indication of the temperature on the display and alarm signaling in case of any parameters being outside the set range.

TR-100 is used to measure and control device temperature via four RT100 sensors connected in a two- or-three-wire circuit, with subsequent indication of the temperature on the display and alarm signaling in case of any parameters being outside the set range.

 

 

It can be used to protect:

 

 

  • engines and generators;

 

  • three-phase air transformers with additional core or environment temperature control.

 

 

TR-100 can use any voltage between 24 and 225V, regardless of the polarity.

 

 

The following thermal sensors can be used by TR-100:

 

 

  • PT100 – platinum sensor with nominal resistance of 100 Ohm at 0 °С;

 

  • PT1000 – platinum sensor with nominal resistance of 1000 Ohm at 0 °С;

 

  • KTY83 – silicon sensor with nominal resistance of 1000 Ohm at 25 °С;

 

  • KTY84 – silicon sensor with nominal resistance of 1000 Ohm at 100 °С;

 

  • PTC (1, 3, 6 serial connection),cold resistance of 20-250 Ohm.

Ask questions specialist

Write Message
Order a free call from our expert.

Message successfully sent! Our manager will contact with you as soon as possible.
Error! Message not sent.