31 Genewska Str., Warszawa 03-940, Poland
Control and protection devices
+442080892027 sales@novatek-electro.com

PHASE INDICATOR RN-12

PHASE INDICATOR RN-12
In stock
7 EUR -
+

RN-12 is designed to indicate the presence of phase voltages in a three-phase AC network.

Main characteristics
  • PHASE INDICATOR
. Warranty

The phase indicator RN-12 is designed to indicate the presence of phase voltages in a three-phase AC network.

Product Connection:

To ensure the reliability of electrical connections, flexible (multi-wire) wires with insulation for a voltage of at least 450 V should be used, the ends of which must be stripped of insulation by 5 ± 0.5 mm and crimped with sleeve tips.

It is recommended to use wires with a cross-section of at least 1 mm2 to connect to the terminals of the input contacts. The fastening of the wires should exclude mechanical damage, twisting and abrasion of the insulation of the wires.

DO NOT LEAVE TIED WIRE PARTS EXTENDING OUTSIDE THE TERMINAL.

For reliable contact, it is necessary to tighten the terminal block screws with force.

If the tightening torque decreases, the connection site heats up, the terminal board may melt and the wire lights up. If the tightening torque is increased, it is possible to break the thread of the terminal block screws or pinch the connected wire.

Connect the product (terminals L1, L2, L3, N) to the mains.

Apply power voltage.

When voltage is applied to the RN-12, the product indicates its presence at the phases corresponding to the marking relative to the neutral wire.

Reviews

     

       
       
      [contact-form-7 404 "Not Found"]
      [contact-form-7 404 "Not Found"]
      [contact-form-7 404 "Not Found"]
      [contact-form-7 404 "Not Found"]

        Send message

         

        Message successfully sent!
        Our manager will contact with you as soon as possible.
        Error!
        Message not sent.

        Product added to cart

        Checkout
        44.200.169.91