Novatek Device Manager has been designed as an automation tool for controlling technological process flow.
It provides solution for the following tasks:
• After the program is started, it runs a computer scan. It automatically defines the communication ports, to which industrial flow process automation devices can be connected.
• In program’s main window the user develops the process flow diagram while defining the communication port interfaces and devices connected. For each device, the program creates links, which define the range of parameters controlled, and frequency of saving their values in respective report files.
All user-assigned project parameters are saved in the special project description file;
•The project can be started to run; during this, the program controls the ranges of controlled parameters set in links dialogue window, and repeatedly saves parameters in the report files;
•A project, that has been run, can be stopped or paused at any time. Upon completion of the project run, the user can make changes to the project flow diagram and existing links to devices. A changed project can be saved in the project file under current name or a new project name. It can also be set to run;
•During the project run, the program controls the ranges of controlled parameters set by the user in the corresponding links. If any value goes out of the specified range, the program signals about it in the special warning message window.
Supported devices:
•UBZ-302 induction motor universal protection device;
•UBZ-302 lift , induction motor universal protection device;
•UBZ-301 universal electric motor protection devices with BO-01 Exchange Unit;
•TP-100 Digital temperature relay
