Software:

The version of RPM-416 Data Analysis must match the firmware version of the recorder.

Firmware versions for the data logger:  

RU-V11, EN-V11, RU-V12, EN-V12, RU-V14, EN-V14, RU-V15, EN-V15, RU-V16, EN-V16, RU-V17, EN-V17, RU-V18, RU-V18, RU-V19, RU-V22, EN-V22, ,RU-V24, EN-V24, 
Firmware update instructions - download ; RPM-416 Data Analysis (v.2.3.0) - download the programme

The RPM-416 data logger is a microprocessor-based device designed to measure values of electrical parameters, display these values on the data logger display, and archive data. It is widely used for energy audits.

Data archiving is performed on a removable memory card (SD / MMC) at a speed of 0.001 s, and can be analysed using the RPM-416 Data Analysis software.

The RPM-416 recorder has a built-in real-time clock powered by a built-in lithium battery.

The RPM-416 can be connected to an Ethernet network using the 10Base-T or 100Base-T standard. In this case, it is possible to configure the RPM-416 and transfer data to a PC simultaneously with recording data to the memory card.

Main features of the recorder:

• Multi-channel - one recorder is enough to obtain complete information about the operation of the monitored object
• Versatility - the recorder provides for the connection of additional modules that allow you to expand the range of input signals (voltage, current, temperature, discrete inputs, etc.)
• Galvanic isolation - the input signals of high voltage and current are galvanically isolated from other inputs, which ensures easy connection of the recorder;
• High reliability - self-monitoring system and data storage algorithm prevent data loss in case of emergency (power failure)
• Convenient setup - four-line backlit character display allows you to configure the recorder and monitor the progress of its operation (the display shows the values of the recorded input signals), the keyboard is used to configure and control the recorder
• Remote monitoring and configuration - the recorder installed in a hard-to-reach place with Ethernet connection is capable of transferring data to a PC in parallel with recording to the memory card, this allows you to remotely monitor the state of the object, a more detailed analysis is performed based on the data stored on the memory card

Web interface allows you to remotely configure the recorder through a computer browser without installing any additional software.